Installation Guide
Installation instructions: perfect hold in just a few minutes
To ensure that you can enjoy your new armrelaxpad for a long time, it is important to fit it correctly. Don't worry - it's really easy. Please take a few moments to prepare.
1. Thorough cleaning (important!)
The adhesive only works perfectly on an absolutely clean surface.
The area must be dust-free, grease-free and dry.
Our tip: Use standard glass cleaner. (Please do not use brake cleaner, as this can damage plastics).
For fabric covers: Lightly dampen the fabric with glass cleaner, dab it with a dry cloth and blow-dry the area until completely dry.
Step 2: Find the position
The test: Do not remove the green protective film yet. Place the armrelaxpad first at the desired location on the door and check your seating position. Rest your arm on the pad – when you have found the perfect height, remember the position well (or mark it lightly).
Step 3: Attach
Press firmly (with force!) Now it gets serious: Remove the protective film.
Place the pad at the marked position.
Important: The adhesive needs pressure.
It helps to open the door, stand next to it and lean with your full body weight on the pad for a few seconds. Press it together as hard as you can.
⚠️ Important note:
Please do not try to correct the position after pressing it on. Removing and reapplying the pad massively weakens the adhesive strength.